Industrial and commercial unit coolers ranging from 1,4 to 85,8 kW (nominal capacity).

• High cooling efficiency coil built of internally grooved tube and corrugated aluminium fins, delivered with sealed circuit with pressured air inside with valve for manometer connection. Finned coil sections separated and independent for each fan.
• Casing made of aluminium and galvanised sheet coated in a corrosion resistant white polyester RAL-9002.
• External rotor fan motor, protection IP-54, thermal protection (thermocontact), single phase 230V of Ø300 and Ø400 mm (commercial ranges) and three phase 400V two speed of Ø500 and Ø630 mm (industrial ranges).

• Delicate fresh goods at +5º C
• Conditioning of working rooms.

• Preservation of fresh goods at 0/+2º C
• Frozen produts at -18º C.

• Preservation of frozen product and low temperature down to -30º C.

• Low temperature rooms
• Tunnels down to -40º C.

Industrial unit coolers with a high performance from a nominal capacity of 31,8 to 130,2 kW. and 4 different series depending on the application.

• High cooling efficiency coil, delivered with sealed circuit with pressured air inside with valve for manometer connection. Finned coil sections separated and independent for each fan.
• Casing made of aluminium and galvanised sheet coated in a corrosion resistant white polyester RAL-9002.
• External rotor fan motor, protection IP-54 and with thermal protection (thermocontact) incorporated. Three phase 400V / 50Hz two speed of Ø630 mm.

• Rooms for preservation of fresh goods at 0 / +2º C.
• Preservation of frozen products up to -20º C.

• Low temperature rooms at -20 / -30º C.
• Fast freezing tunnels up to -40º C.

Commercial unit coolers manufactured in two versions to fit different conditions and requirements, ranging from a nominal capacity of 1,7 up to 10,5 kW.

• Coil manufactured with 1/2" O.D. Internally grooved copper tube and corrugated aluminium fins of high efficiency. Sealed circuit with pressure air inside to assure the coil is received totally leak free. With valve for manometer connection. Models ECM-115 and ECM-130 are single circuit without liquid distributor.
• Casing made of painted aluminium and galvanised steel with high corrosion resistance and rigidity. Removable side covers to ease the access to the inside for instalation and maintenance operation.
• Axial singlephase fans with 300 mm Ø 230V 50/60Hz of low power consumption. Wired in factory to a centralized IP-55 junction box.

• Delicate fresh goods at 0/+2ºC.
• Preservation of frozen products down to -20ºC.

• Low temperature rooms down to -25ºC.

Extra flat unit coolers with dual air discharge and a nominal capacity between 1,8 and 25,4 kW, designed to be installed in the ceiling of the refrigeration room.

Normal version N with 4 pole motors and silent S with 6 poles motors for those applications requiring low sound level or low air flow.

• Coil manufactured with 3/8" O.D. internally grooved copper tube and corrugated aluminium fins of high efficiency. Delivered with sealed circuit with pressured air inside to assure the coil is received totally leak free and valve for manometer connection. Finned coil sections separated and independent for each fan.
• Casing made of aluminium and galvanised sheet coated in a corrosion resistant white polyester RAL-9002.
• Axial fans with external rotor, singlephase 230V/50 Hz of Ø300 and Ø400 mm. Protection IP-54 and thermal protection (Thermocontact).

• Delicate fresh goods at more than +5ºC
• Conditioning of working rooms.

• Rooms for preservation of fresh goods at 0 / +2ºC
• Preservation of frozen products down to -20ºC

High performance dual air discharge unit coolers, specially designed for a wide range of industrial applications and quick freezing/cooling tunnels. With a lower profile and a more gentle airflow than the cubic unit coolers. Manufactured in three different series for different applications with a nominal capacity from 8,4 to 60 kW.

• Coil manufactured with 1/2" O.D. internally grooved copper tube and corrugated aluminium fins of high efficiency. Delivered with sealed circuit with pressured air inside to assure the coil is received totally leak free and with valve for manometer connection. Finned coil sections separated and independent for each fan.
• Casing made of aluminium and galvanised sheet coated in a corrosion resistant white polyester RAL-9002.
• Axial fans with external rotor, three phase motors 400V / 50Hz two speed and fan diameter of 500 mm..
• Δ Connection: Alta veHigh speed 1.300 r.p.m. (Standard connection)
  Y Connection: Low speed 900 r.p.m.
  Protection IP-54 and with thermal protection (Thermocontact).

• Preservation of fresh goods at 0/+2º C
• Frozen produts at -18º C

• Preservation of frozen product
• Low temperature down to -30º .

• Low temperature rooms and tunnels down to -40º C.

Dual air discharge evaporators designed for use in rapid cooling tunnels for fruit and vegetables or for freezing tunnels where high air pressure is required, together with perfect distribution through the product located on the pallets. Nominal capacity range from 29,8 to 150 kW.

• TTM/TTB : Medium temperatures
• TTL : Low temperatures
• TTX : Ultra low temperatures

 

• High cooling efficiency coil, delivered with sealed circuit with pressured air inside with valve for manometer connection. Finned coil sections separated and independent for each fan.
• Casing made of aluminium and galvanised sheet coated in a corrosion resistant white polyester RAL-9002.
• Axial fans 400V/3 50Hz. Pro tection IP-54, ther mal protection (thermocotact) (Ø630 mm); protection IP-55 (Ø710 mm).

Unit coolers designed for industrial cold storage rooms and more specifically for freezing tunnels requiring a good air distribution and an efficient use of the available space.

• Series MRB - Medium temperatures
• Series MRL - Low temperatures.
• Series MRX - Ultra low temperatures.

• High cooling efficiency coil, delivered with sealed circuit with pressured air inside with valve for manometer connection. Finned coil sections separated and independent for each fan.
• Casing made of aluminium and galvanised sheet coated in a corrosion resistant white polyester RAL-9002.
• Axial fans 400V/3 50Hz. Pro tection IP-54, ther mal protection (thermocotact) (Ø630 mm); protection IP-55 (Ø710 mm).

These units are specially recomended for preserving delicate goods, as flower, cheese, meat, fruits, vegetables, dough retarding, etc. Nominal capacities from 2,5 to 8,6 kW.

They are also recommendable in the air-conditioning of laboratories, jointing rooms in meat industries, etc. because their low noise level and gentle airflow.

• The evaporating coil is built with inner grooved copper tube and corrugated aluminium fins with 4,2 mm fin spacing with high efficiency.
• Casing made of aluminium sheet coated in a corrosion resistant white polyester RAL-9002.
• Axial fans 230V 50Hz of Ø230 and Ø300 mm. singlephase. With protection IP-54 and thermal protector (Thermocontact).

Centrifugal evaporators for freezing or working rooms with positive temperatures ranging from 17,7 to 66,8 kW (nominal)

• Coil manufactured with 1/2" O.D. internally grooved copper tube and corrugated aluminium fins of high efficiency. Delivered with sealed circuit with pressured air inside to assure the coil is received totally leak free and with valve for manometer connection. Finned coil sections separated and independent for each fan.
• Casing made of aluminium and galvanised sheet coated in a corrosion resistant white polyester RAL-9002.
• Lateral pannels easily removable that allow the access to the inside for cleaning and maintenance operation.
• Lower and intermediated drip tray covering all the bottom of the evaporator for an optimal draining of the condensed water.
• Centrifugal direct driven and closed fan motors three phase 230/400V 50 Hz, protection IP54 with high available pressure allowing the possibility of connecting long air ducts.

Minimun dimensions, specially height since they are primarily designed for commercial refrigerating cabinets or small cold storage rooms of low height.

For use in medium and low temperatures for preserving frehs or frozen goods.

• The evaporating coil is built with internally grooved copper tube and corrugated aluminium fins with 6.6/3.3 mm (MVP and MVG) and 7 mm (MVB) fin spacing.
• Made of a corrosion resistant aluminium . With removable drip tray at the bottom and intermediate tray under the coil to allow the water drainage and to fasten the defrosting heaters. Galvanized steel supports for anchoring to the ceiling.
• Axial fan of 150 mm Ø (MVP) and 230 mm Ø (MVG and MVB), with high performance, low consumption and quiet single-phase 230V 50/60 Hz electric motors, and connected to waterproof junction boxes, according to Standard IP-55.

Gravity evaporators designed for cold-storage rooms between 0 and -10º C for preserving delicate products, with constant temperature and hygrometric content. Capacities between 455 and 3.920 W in nominal conditions.

• Coil built with copper tube arranged in a staggered position and corrugated aluminium fins arranged with single spacing of 12 mm for great efficiency.
• Single circuit for models SN-1 to SN-8 and double refrigerated circuit for the other two models SN-9 and SN-10 with multiple injection by means of a distributor.
• Drip tray incorporated, specially constructed from PVC with a special section comprising a double canal at the bottom to prevent drips and condensation from falling on to the goods stored in the cold-room, together with a large scoop for collecting the water during desfrosting.