Refrigeration products for any industrial applications and requirements
EFFICIENT COLD
CUBIC
The evaporators manufactured by FRIMETAL are designed to satisfy all the requirements of today´s refrigeration market.
blanco
FR SERIES
Nominal Capacities between 1,4 and 85,8 KW
Nominal Capacities between 1,4 and 85,8 KW
Cubic evaporators for all kind of applications with a wide range including commercial models with single phase fan motors of diameter Ø 300 and Ø 400mm and industrial models with three phase fan motor of 500 and 630mm.
| Series | Fin Spacing | Aplication |
|---|---|---|
| FRM | 4,2 mm | Preservation of fresh goods at 0/+2ºC and frozen products at -18ºC |
| FRB | 7 mm | Preservation of frozen products down to -30ºC |
| FRL | 9 mm | Very low temperature rooms and tunnels down to -40ºC |
CHARACTERISTICS
- Casing in aluminium sheet and galvanized steel coated in white polyester RAL-9002 resin .
- Galvanized steel supports for anchoring to the ceiling.
- Axial fan motors with external rotor and thermal protection.
- Commercial range: diameters 300 and 400mm 230V/1/50Hz, IP-44.
- Industrial range: diameters 500 and 630mm, 2 speed 400V/3/50Hz, IP-54.
SPECIFIC OPTIONS OF THIS RANGE
- All kind of defrosting systems: by electric heaters, hot gas, cycle inversion and water spread.
- Round electric heaters for fan ducts.
- Anti condensation insulated drip tray.
- Circuits for water, brines, or other liquids.
- Special fan motors single phase 230V/60Hz or three phase from 230V to 460V and 50 or 60Hz.
- With an additional heating coil for working as drying unit.
GR SERIES
Nominal Capacities between 31,8 and 155 KW
Nominal Capacities between 31,8 and 155 KW
Large industrial cubic evaporators for all kind of applications with three phase fan motor of diameter 630 and 800mm.
| Series | Fin Spacing | Aplication |
|---|---|---|
| GRM | 4,2 mm | Preservation of fresh good at 0/+2ºC and frozen products at -18ºC |
| GRB | 6 mm | Preservation of fruits or frozen products down to -18ºC |
| GRL | 9 mm | Reservation of frozen products down to -30ºC |
| GRX | 12 mm | Very low temperature cold roomm and tunnels down to -40ºC |
CHARACTERISTICS
- Casing of aluminium sheet or galvanized steel coated in white polyester RAL-9002 resin.
- Door system for an easy maintenance.
- Galvanized steel supports for anchoring to the ceiling.
- Axial fan motors with external rotor, IP-54 protection and thermal protection (thermocontact). Three phase, 2 speeds, 400V/50Hz.
SPECIFIC OPTIONS OF THIS RANGE
- All kind of defrosting systems: by electric heaters, hot gas, cycle inversion and water spread.
- Round heaters for the fan motors duct.
- Anti condensation insulated drip tray.
- Circuits for water, brines or other liquids.
- Special fan motors three phase from 230V to 460V and 50 or 60Hz, special aerofoil fan motors for high pressure drop, etc.
EC SERIES
Nominal Capacities between 1,7 and 14 KW
Nominal Capacities between 1,7 and 14 KW
Commercial cubic evaporators for cold rooms of small and medium size with axial single phase fan motors with external rotor of diameter 300 and 400mm.
They are an economic alternative to the commercial cubic evaporators range FR.
| Series | Fin Spacing | Aplication |
|---|---|---|
| ECM | 4,2 mm | Preservation of fresh goods at 0/+2ºC and frozen products at -18ºC |
| ECB | 7 mm | Preservation of frozen products down to -30ºC |
CHARACTERISTICS
- Casing in aluminium sheet and galvanized steel coated in white polyester RAL-9002 resin.
- Axial fan motors with external rotor and thermal protection, diameter 300 or 400mm, single phase 230V/50Hz, IP-44.
SPECIFIC OPTIONS OF THIS RANGE
- Round electric heaters for fan ducts.
- Single phase fan motors 230V/60Hz.