+34 913 030 426 com@frimetal.es

Refrigeration products for any industrial applications and requirements

EFFICIENT COLD

Dual discharge unit coolers

The evaporators manufactured by FRIMETAL are designed to satisfy all the requirements of today´s refrigeration market.

blanco

PI COMERCIAL SERIES

Nominal Capacities between 1,6 and 25,7 KW

Nominal Capacities between 1,6 and 25,7 KW

Ceiling mounted evaporators with dual air discharge and low height, designed to be placed in the centre of the cold room ceiling providing a gentle and uniform air flow and making the best use of the space. Valid for the preservation of fresh or frozen products and ideal for aisles or working rooms.

With axial fan motors of external rotor, single phase and diameter of 300 and 400mm in normal version N and silent version S for applications where low level noise or smooth air flow is required.

Series Fin Spacing Aplication
PIA 2,8 mm Fresh products over +5ºC and working rooms
PIM 4,2 mm Fresh goods at 0/+2ºC
PIB 7 mm Preservation of frozen products at -20ºC

CHARACTERISTICS

  • Casing in aluminium sheet and galvanized steel coated in white polyester RAL-9002 resin.
  • Supports of galvanized steel for anchoring to the ceiling.
  • Axial fan motors with external rotor, single phase 230V/50Hz IP-44 and thermal protection.
    • Normal version N : 4 pole fan motors 1300rpm.
    • Silent version S : 6 pole fan motors  900rpm.

SPECIFIC OPTIONS OF THIS RANGE

  • Anti condensation insulation drip tray.
  • Circuits for water, water-glycol or other brines or liquids.
  • Special fan motors single phase 230V/60Hz or three phase from 230V to 460V and 50 or 60Hz.
  • Placement of an aditional heating coil to work as a drying unit.

DOWNLOAD CATALOGUE > DOWNLOAD MANUAL >

PI INDUSTRIAL SERIES

Nominal Capacities between 8,4 and 60 kW

Nominal Capacities between 8,4 and 60 kW

Dual air discharge evaporators for industrial cold rooms and tunnels of medium duty. With regard to the cubic evaporators, this range has a lesser height and provides a smoother air flow.

With three phase fan motors of external rotor, two speed and diameter of 500mm. They can be connected at high speed (Delta connection) or low speed (Star connection) for applications where is required a low level noise or a gentle air flow.

Series Fin Spacing Aplication
PIM 4,2 mm Fresh goods at 0/+2ºC and frozen products at -18ºC
PIB 7 mm Fresh goods at 0/+2ºC and frozen products at -18ºC
PIL 9 mm Preservation of frozen products at -30ºC and tunnels down to -40ºC.

CHARACTERISTICS

  • Casing of aluminium sheet and galvanized steel coated in white polyester RAL-9002 resin.
  • Supports of galvanized steel for anchoring to the ceiling.
  • Axial fans with external rotor, three phase 400V/50Hz IP-54, two speed and thermal protection (thermocontact).
    • Connection D (Delta) : High speed 1300 rpm (standard connection).
    • Connection Y (Star) : Low speed 900 rpm.

SPECIFIC OPTIONS OF THIS RANGE

  • Anti condensation insulation drip tray.
  • Round electric heaters for the fan motors ducts.
  • Circuits for water, water-glycol or other brines or liquids.
  • Special fan motors three phase from 230V to 460V and 50 or 60Hz.

DOWNLOAD CATALOGUE > DOWNLOAD MANUAL >

TT SERIES

Nominal Capacities between 29,8 and 150 kW

Nominal Capacities between 29,8 and 150 kW

Dual discharge evaporators designed for use in fast cooling tunnels of medium or low temperatures where high air pressure is required, together with perfect air distribution through the product located on the pallets.

The evaporator must be placed in the centre of the tunnel ceiling and must occupy the entire length of the tunnel. The pallets holding the product must be located lengthways on both sides, separated by a central aisle for the air returning to the fans.

Series Fin Spacing Aplication
TTM 4,2 mm Medium temperature tunnels
TTB 7 mm Medium temperature tunnels
TTL 9 mm Low temperature tunnels
TTX 12 mm Very low temperature tunnels down to -40ºC

CHARACTERISTICS

  • Casing manufactured in aluminium sheet and galvanized steel coated in white polyester RAL-9002 resin of high resistance.
  • Steel galvanized supports for anchoring to the ceiling.
  • Axial three phase fan motors at 400V/50Hz of two types:
    • Diameter 630: external rotor, IP-54 protection and thermal protection (thermocontact).
    • Diameter 710: tubular aerofoil typy of high pressure and air flow with IP-55 protection.

SPECIFIC OPTIONS OF THIS RANGE

  • All kind of defrosting systems: by electric heaters, got gas, cycle inversion and water spreading.
  • Round heaters for the fan motors ducts.
  • Anti condensation insulated drip tray.
  • Special custom-made evaporators adapted to the dimensions of the tunnel can also be manufactured on request.

DOWNLOAD CATALOGUE > DOWNLOAD MANUAL >